Key takeaways
- Basic vertical PDUs simply distribute power to multiple outlets with no monitoring or remote control, the lowest-cost and simplest option for a rack that just needs more outlets.
- Metered PDUs display current load, sometimes per outlet bank or per phase, which helps avoid overloading a circuit without plugging in a separate meter.
- Switched or remote-controlled PDUs allow turning individual outlets on or off, and in some models rebooting them, through a network connection or local interface, which suits racks where remote power-cycling individual devices is valuable.
A basic vertical 0U power strip suits a small home-lab rack that just needs extra outlets without giving up any rack-unit space, a metered vertical PDU suits anyone who wants to see load per outlet or per phase, and a switched/remote-controlled vertical PDU suits a rack with equipment that may need individual outlets power-cycled remotely.
Vertical rack power strips, usually called 0U PDUs (power distribution units) because they mount in the side channel of a rack rather than taking up horizontal rack-unit space, solve a specific problem: fitting many outlets into a rack without using up the rack units needed for servers, switches, and other equipment. Picking the right one comes down to outlet count and spacing, mounting compatibility with the specific rack, and how much monitoring or remote control is actually needed versus just extra outlets.
What to look for before buying
Outlet count and spacing
Vertical PDUs are commonly available in a range of outlet counts, and the outlet spacing along the strip’s length matters as much as the total count: densely spaced outlets can block adjacent slots if plugged-in power supplies have oversized bricks or wide plugs, which is a common complaint with budget PDUs packed with closely spaced outlets. PDUs designed for server equipment sometimes space outlets further apart, or stagger them, specifically to avoid this.
Input plug, voltage, and amperage rating
Check the PDU’s input plug type and the circuit it needs to connect to, since higher-capacity PDUs often use a different plug than a standard household outlet and may require a dedicated circuit. The PDU’s total rated amperage or wattage must cover the combined draw of everything that will be plugged into it, with some margin, rather than being sized to exactly match a worst-case estimate.
Basic vs. metered vs. switched/remote-controlled
- Basic vertical PDUs simply distribute power to multiple outlets with no monitoring or remote control, the lowest-cost and simplest option for a rack that just needs more outlets.
- Metered PDUs display current load, sometimes per outlet bank or per phase, which helps avoid overloading a circuit without plugging in a separate meter.
- Switched or remote-controlled PDUs allow turning individual outlets on or off, and in some models rebooting them, through a network connection or local interface, which suits racks where remote power-cycling individual devices is valuable.
Mounting compatibility with the rack
Vertical PDUs mount in the rack’s rear vertical channel using brackets sized for a specific rack width and depth; confirming the PDU’s mounting bracket type matches the actual rack (two-post open rack, four-post enclosed cabinet, and so on) avoids a PDU that doesn’t physically fit the available mounting rail. Some PDUs include adjustable or tool-less brackets meant to fit a range of rack depths, which is worth checking against the specific cabinet in use.
Cable management and cord routing
A vertical PDU sits in a channel that often also carries network and power cables from rack-mounted equipment; checking the PDU’s width and any included cable-routing features against how crowded that side channel already is helps avoid a tight fit that makes cable management harder rather than easier.
At a glance: vertical rack PDU types compared
| Type | Best for | Key stated specs | Limits |
|---|---|---|---|
| Basic vertical 0U PDU | Home labs and small racks needing more outlets without monitoring | Multiple outlets along a vertical strip, 0U (no horizontal rack space used), simple on/off | No load visibility or remote control |
| Metered vertical PDU | Racks where avoiding circuit overload matters | Local display of current draw, sometimes per bank or per phase | Higher cost than basic units; monitoring is local-display only unless it also has network reporting |
| Switched/remote-controlled vertical PDU | Racks needing remote power-cycling of individual outlets | Network-connected control, individually switched or rebootable outlets | Highest cost and complexity; needs network setup and ongoing management |
Fit and compatibility notes
Measure the rack’s usable vertical channel height and depth before ordering, since a PDU longer than the available channel space, or one using brackets sized for a different rack depth, will not mount cleanly. Check that the outlet spacing accommodates the specific power supplies already in the rack, particularly any wide “wall-wart” style adapters that can block neighboring outlets on a tightly spaced strip. For higher-capacity PDUs, confirm the required input plug and circuit are available at the rack’s location, since some larger PDUs need a dedicated circuit or a different plug than what’s already run to that spot.
Pick X if…
| If you… | Choose |
|---|---|
| Just need more outlets in a small home-lab rack | Basic vertical 0U PDU |
| Want visibility into circuit load without a separate meter | Metered vertical PDU |
| Need to remotely reboot individual rack-mounted devices | Switched/remote-controlled vertical PDU |
| Have wide power-supply bricks that crowd adjacent outlets | A PDU with staggered or widely spaced outlets |
| Run equipment needing more amperage than a standard household circuit provides | A higher-capacity PDU matched to an appropriate dedicated circuit and plug type |
Alternatives worth considering
Horizontal rack-mounted PDUs use one or more rack units of horizontal space instead of the vertical side channel, which can suit a rack with limited vertical channel depth but costs usable rack-unit space that could otherwise hold equipment.
Standard consumer power strips mounted inside the rack can work for very small or informal setups, though they generally lack rack-specific mounting brackets and the outlet spacing and durability built for rack equipment.
Smart plugs on individual outlets can add remote control to a basic PDU’s outlets piecemeal, without replacing the whole PDU, for a rack where only one or two devices need remote power-cycling rather than the whole strip.
Frequently Asked Questions
What does “0U” mean on a rack PDU?
0U means the PDU mounts in the rack’s vertical side channel rather than occupying any of the horizontal rack units used for servers, switches, and other equipment. This is the main appeal of a vertical PDU over a horizontal one in space-constrained racks.
How many outlets do I need on a rack PDU?
This depends on the number of devices currently in the rack plus reasonable room for growth, and on how many of those devices have unusually wide power adapters that might block neighboring outlets. Counting actual devices and checking plug types before choosing an outlet count avoids buying a PDU that looks adequate on paper but runs out of usable outlets in practice.
Can I mount a vertical PDU in any server rack?
Vertical PDUs use mounting brackets sized for a specific rack width and depth, so a PDU designed for a four-post enclosed cabinet may not fit a two-post open rack, and vice versa. Checking the PDU’s stated rack compatibility against the specific cabinet in use, including depth and post spacing, is necessary before assuming it will fit.
Do I need a metered PDU if I’m not running a lot of equipment?
For a small rack with a handful of low-draw devices, a basic unmetered PDU is often sufficient, and metering becomes more useful as the number of devices and their combined draw grows closer to the circuit’s rated capacity. Metering is primarily valuable for avoiding unexpected circuit overloads rather than for its own sake.
Is a switched PDU worth the added cost for a home lab?
A switched or remote-controlled PDU is most valuable when equipment in the rack occasionally needs a hard power cycle and physical access isn’t always convenient, such as a rack in a different room or location. For a rack that’s easily reachable and rarely needs a forced reboot, a basic or metered PDU without remote switching may be enough.
Can a vertical PDU share a circuit with other equipment in the same room?
It can, as long as the combined draw of the PDU’s connected equipment plus anything else on that circuit stays within the circuit’s rated capacity; exceeding that capacity risks tripped breakers or, in older wiring, overheating. Checking the circuit’s existing load before adding a rack’s worth of equipment to it is a reasonable precaution, and a dedicated circuit is often recommended for higher-draw rack setups.
Further reading
- Best in Wall Power Strip: Picks and What to Look For (2026)
- Best 30 Outlet Power Strip: Picks and What to Look For (2026)
- Best Diamond Plate Power Strip: Picks and What to Look For (2026)
- Best Power Strip with Dimmer: Picks and What to Look For (2026)
- Best Bookshelf Speakers Under $500: Picks and What to Look For (2026)
- Best Wall Mounted Whiteboards for Classrooms: Picks and What to Look For (2026)