Updated Nov 18, 2026· 6 min read

Key takeaways

  • Basic grommet with AC outlets only: A simple round or oval insert with two to four standard AC sockets, no USB ports. Suits buyers who mainly need standard plugs for a monitor, lamp, or printer.
  • Grommet with combined AC and USB ports: The most common current style, offering a mix of standard AC outlets and USB-A/USB-C charging ports in one module, for a desk shared between full-size electronics and phone/tablet charging.
  • Cable-management-only grommets (no power): A plain pass-through grommet with no electrical component, for buyers who only need to route cables neatly through the desktop and already have power handled separately.
  • Surface-mount power modules (no drilling required): Clamp-on or adhesive-mount power hubs that sit on top of the desk or clip to the edge, for anyone who doesn’t want to cut a hole in the desktop at all.

Anyone retrofitting power and cable management into an existing desk should start with the grommet hole size already in the desktop (or the size they’re willing to drill), since desk grommet power outlets are sized to fit a round or oval cutout and come in a few standard diameters; the secondary choice is how many AC outlets and USB ports the module needs to cover everyone’s devices at that desk.

What a Desk Grommet Power Outlet Is

A desk grommet power outlet is a round or oval module that drops into a hole cut through the desktop, combining a cable pass-through (so cords can run from above the desk to equipment or outlets below) with a small built-in power strip. It’s commonly used to retrofit power into an existing desk that didn’t come with outlets, or to replace a basic cable-only grommet with one that also distributes power. The module plugs into a nearby wall outlet or power strip via its own cord, then provides AC sockets and often USB ports at the desktop surface.

Main Types Buyers Compare

  • Basic grommet with AC outlets only: A simple round or oval insert with two to four standard AC sockets, no USB ports. Suits buyers who mainly need standard plugs for a monitor, lamp, or printer.
  • Grommet with combined AC and USB ports: The most common current style, offering a mix of standard AC outlets and USB-A/USB-C charging ports in one module, for a desk shared between full-size electronics and phone/tablet charging.
  • Cable-management-only grommets (no power): A plain pass-through grommet with no electrical component, for buyers who only need to route cables neatly through the desktop and already have power handled separately.
  • Surface-mount power modules (no drilling required): Clamp-on or adhesive-mount power hubs that sit on top of the desk or clip to the edge, for anyone who doesn’t want to cut a hole in the desktop at all.

At a Glance

Type Best For Key Stated Specs Limits
Basic AC-only grommet Standard plug needs: monitor, lamp, printer Round/oval insert; typically 2-4 AC outlets; common diameters around 2-3 inches No USB charging ports built in
Combined AC + USB grommet Mixed device charging and standard plugs AC outlets plus USB-A/USB-C ports; stated charging wattage varies by model Higher cost than AC-only versions; USB output speed varies by model
Cable-only grommet (no power) Cable routing only, power handled separately Pass-through hole cover; no electrical component Doesn’t solve the power/outlet need on its own
Surface-mount power module No-drill retrofit on an existing desk Clamp or adhesive mount; sits on or at the edge of the desktop Takes up desktop or edge space rather than sitting flush in a hole

Pick This If…

Situation Recommended Type
You only need standard plugs for a monitor, lamp, or printer Basic AC-only grommet
You want to charge phones/tablets and run standard electronics from the same spot Combined AC + USB grommet
You already have power handled and just need tidy cable routing Cable-only grommet
You don’t want to cut a hole in your desktop Surface-mount power module

Fit and Sizing Notes

If a desk already has a grommet hole (common on many office and gaming desks), measure its diameter precisely before ordering a replacement power grommet — common sizes run roughly 2 to 3 inches, but exact fit matters since an undersized insert will leave gaps and an oversized one won’t fit the hole at all. If cutting a new hole is required, check the chosen grommet’s specified cutout diameter and use a hole saw matched to that size, and confirm the desktop thickness falls within the grommet’s stated clamping range so the lip sits flush on both sides.

Desktop material matters for drilling: solid wood, laminate, and veneer desktops cut differently, and veneer or laminate surfaces can chip without a backing board or the right hole saw technique. If in doubt about cutting into an existing desk, a surface-mount power module avoids the risk entirely.

Power Capacity and Installation Notes

Like any power strip, a grommet outlet has a stated maximum wattage or amperage; check this against the combined draw of everything that will be plugged in, especially if a monitor, small heater, or other higher-draw device will share the outlet with lighter electronics. USB port output again depends on the specific module’s stated wattage — a basic USB-A port will charge a phone slower than a higher-output USB-C port, so check the specification rather than assuming all USB ports perform the same.

Installation is generally simple: cut or use the existing hole, drop in the grommet, route the cord to a nearby wall outlet or power strip, and secure according to the maker’s instructions. As with any add-on power strip, avoid overloading it or daisy-chaining additional extension cords off of it, and stop using any unit that shows cord damage or overheating.

Cord Management and Placement Notes

Where the grommet sits on the desktop affects how useful it ends up being day to day — placing it too close to the back edge can make reaching the ports awkward, while placing it too far forward leaves cords crossing the main work area. Many buyers position the grommet slightly back and to one side of the desk’s center, close enough to equipment like a monitor or laptop dock to minimize visible cord length while staying clear of where hands and arms rest while typing. If the desk will host multiple people’s devices (a shared or guest-facing desk), positioning the grommet more centrally can make it more accessible from either side.

Cord routing below the desk also matters once the grommet is installed — the cord running from the grommet to the wall outlet is often long enough to need its own management, such as a cable clip, sleeve, or tray, to avoid a tangle underneath the desk. Checking whether the grommet kit includes any under-desk cable management or whether that needs to be purchased separately helps set expectations before installation.

Alternatives Worth Comparing

  • Under-desk power strip mounts: A power strip secured to the underside of the desk rather than through a hole in the top, keeping the desktop surface completely clear.
  • Desk with a factory-built-in outlet: Buying a new desk that already includes a built-in power strip avoids retrofitting a grommet into an existing piece of furniture.
  • Floor or wall-mounted power strip with cable clips: For buyers who don’t want to modify the desk at all, routing cables down to a floor-level power strip with simple cable clips is a low-cost alternative.

Frequently Asked Questions

What size hole do I need for a desk grommet power outlet?

It depends on the specific product’s stated cutout diameter, commonly in the 2 to 3 inch range, so check the manufacturer’s specification before cutting or ordering. If a hole already exists, measure it first and match the grommet to that size rather than the reverse.

Can I install a grommet power outlet without cutting my desktop?

Yes, if the desk already has a compatible grommet hole, or by choosing a surface-mount or clamp-style power module instead, which avoids drilling entirely. Check both options against your desk before deciding.

How many devices can I plug into a desk grommet outlet?

This depends on the number of AC outlets and USB ports on the specific model and its stated total wattage/amperage capacity. Check the product specification against your combined device load, especially if higher-draw electronics are involved.

Will a desk grommet outlet fit any desktop thickness?

Not every thickness — grommets have a stated clamping range for desktop thickness, and a desk outside that range may not seat securely. Check the maker’s specification against your desk’s actual thickness before buying.

Can I cut a grommet hole in a laminate or veneer desktop without chipping it?

Using a hole saw sized to the grommet’s cutout and cutting slowly with a backing board underneath reduces chipping risk on laminate or veneer surfaces, but there’s still some risk compared to solid wood. If you’re not comfortable with this, a surface-mount power module avoids cutting altogether.

Do grommet outlets include surge protection?

Some models state surge protection as a feature and others don’t, so check the specific product’s listed specifications rather than assuming. If surge protection matters to you, look for it explicitly in the product description before buying.

C
Coworkingng Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.