Updated Nov 17, 2026· 7 min read

Key takeaways

  • A single-line in-line planer board suits an angler running one or two extra lines off the side of the boat for walleye or trout trolling, while a mast and tree system with multiple planer boards is the better fit for…

A single-line in-line planer board suits an angler running one or two extra lines off the side of the boat for walleye or trout trolling, while a mast and tree system with multiple planer boards is the better fit for serious multi-species trollers who want to spread four or more lines wide to cover more water at once. The main differences across this category are release mechanism type, board size relative to boat speed, and whether the board is meant for casual use or a full planer board mast system.

What Planer Boards Do and Who Uses Them

Planer boards pull a fishing line out to the side of a moving boat, letting anglers spread multiple lines across a wider path of water instead of running them all directly behind the boat. This is especially useful for species like walleye, trout, and salmon that can be spooked by boat noise and prop wash directly overhead, since a line out to the side presents a bait or lure in water the boat hasn’t yet disturbed. Trolling with planer boards is common on the Great Lakes and large reservoirs where covering more water and running more lines at once directly increases the chances of a strike. Brands associated with this category include Church Tackle, Off Shore Tackle (known for the OR12 and OR16 series), and various walleye-focused board makers.

In-Line Boards vs Mast-and-Release Systems

In-line planer boards are the simpler of the two main designs: the board clips directly onto the fishing line itself, with the line running through the board rather than attaching to a separate mast-mounted release clip. These are easier for a beginner to rig and don’t require any permanent mounting hardware on the boat, making them a reasonable entry point. Mast-and-release systems use a mast mounted to the boat with a pulley-run rope, and each fishing line attaches to a release clip that rides out along that rope to a separate planer board. This setup allows running multiple boards and lines per side in a staggered formation, which is the standard approach for anglers serious about spreading four, six, or more lines at once, but it requires more boat-mounted hardware and a steeper learning curve to rig correctly.

Board Size and Boat Speed Compatibility

Planer board size affects how much pull the board generates at a given trolling speed, which in turn affects how far out to the side it tracks and how it handles rougher water. Smaller boards track well at slower trolling speeds typical of walleye fishing, roughly 1 to 2 mph, while larger boards are often better suited to the faster speeds used in salmon or trout trolling. Running a board that’s undersized for the boat’s typical trolling speed can result in poor tracking or the board riding unevenly, while an oversized board at slow speed may not plane out properly at all. Checking the maker’s stated speed range against typical trolling speed for the target species helps avoid this mismatch.

Release Clip Tension and Line Weight Matching

The release clip, whether built into an in-line board or mounted on a mast rope, needs to be tensioned to the line and lure weight being used so it releases cleanly when a fish strikes without releasing prematurely from boat wake or wave action. Clips that are too loose for the line weight will trip falsely, while clips set too tight risk missing a strike or, in the worst case, failing to release at all and pulling a smaller planer board under. Most release clips are adjustable, and getting the tension dialed in for the specific rod, line, and lure combination in use is part of normal setup rather than a one-time adjustment.

At a Glance: Planer Board Types Compared

Type Best For Key Stated Specs Limits
In-line planer board Casual trolling, one or two extra lines, beginners Line runs through the board, no mast needed Limited to fewer lines per side than mast systems
Small mast-mounted board Walleye trolling at slower speeds Sized for 1-2 mph trolling, moderate pull Needs mast and release clip hardware installed
Large mast-mounted board Salmon/trout trolling at faster speeds Sized for higher trolling speeds, stronger pull Overkill and poor tracking at slow walleye speeds
Full mast-and-tree multi-board system Running many lines spread wide across the water Multiple release clips per side, adjustable spread Most complex and costly setup to rig and learn

Pick This If…

Situation Recommended Type
New to planer boards and want a simple setup In-line planer board, one or two lines
Trolling for walleye at slow speeds Small mast-mounted board sized for 1-2 mph
Trolling for salmon or trout at higher speeds Large mast-mounted board sized for faster trolling
Wanting to run many lines spread across a wide path Full mast-and-tree multi-board system

Boat Compatibility and Rigging Notes

Mast-mounted systems need a stable mounting point on the boat, typically on the gunwale or a rod holder base, and the mast height and rope length should be matched to boat width for an even spread on both sides. Smaller boats may struggle to run a full multi-board setup simply due to limited rail or gunwale space for mast mounting and rod holders. In-line boards avoid this issue since they need no permanent hardware, which is part of why they remain a common choice for smaller boats or anglers who don’t want to commit to a full mast system. Regardless of board type, checking line and lure weight against the release clip’s adjustable range before heading out avoids a frustrating day of false releases or missed strikes.

Alternatives Worth Considering

For anglers who mainly fish from shore or a smaller boat without room for planer board rigging, a simple side-planer bobber or inline weight system offers some of the same line-spreading effect on a much smaller scale. Downriggers serve a different purpose — controlling depth rather than spreading lines to the side — and are often used alongside, not instead of, planer boards by trollers who want to control both depth and spread at once. For those mainly fishing structure or specific depth bands rather than covering open water, standard trolling without any planer board setup remains a simpler and lower-cost approach, even though it covers less water per pass.

Frequently Asked Questions

Do I need a mast system, or are in-line boards good enough?

In-line boards are a practical choice for running one or two extra lines without any permanent boat hardware, and many anglers never need more than that. A mast system becomes worthwhile mainly when the goal is running several lines per side in a wide, staggered spread, which in-line boards alone can’t easily replicate.

How do I know what size planer board to buy?

Match the board’s stated speed range to the typical trolling speed used for the target species, since walleye trolling speeds are generally much slower than salmon or trout trolling speeds. Buying a board sized for the wrong speed range is one of the more common reasons a planer board doesn’t track or plane out as expected.

Why does my planer board keep releasing when it shouldn’t?

A release clip set too loose for the line and lure weight in use is the most common cause of false releases from wave action or boat wake rather than an actual strike. Adjusting the clip tension to better match the specific line weight and lure drag usually resolves this.

Can planer boards be used on small boats?

In-line boards work well on small boats since they need no mounted hardware, while full mast systems can be difficult to fit on boats with limited gunwale or rail space. Checking available mounting space before investing in a mast system avoids a setup that doesn’t physically fit the boat.

Do planer boards work for species other than walleye and salmon?

Planer boards are used for a range of trolled species, including trout and some panfish trolling setups, wherever spreading lines away from the boat’s direct path helps avoid spooking fish or covering more water. The core principle, pulling lines out to the side, applies broadly, though board size and speed should still be matched to the target species’ typical trolling speed.

What line weight works best with planer boards?

Most planer board release clips are adjustable across a range of common trolling line weights, so there isn’t one single “correct” line weight, but rather a need to tension the clip to match whatever line and lure combination is being run. Checking the clip’s stated adjustable range against the intended line weight before purchase helps confirm compatibility.

C
Coworkingng Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.