Key takeaways
- Open RIB tenders – rigid hull with inflatable tubes, console steering, bench or jockey seating. The most common choice because they are light for their size, stable at rest, and forgiving to dock.
- Walkaround / limousine tenders – a hardshell or RIB hull with a cabin, windshield, and sometimes a small head. Chosen when the tender doubles as a weekend day boat.
- Jet-drive tenders – propulsion by waterjet instead of an outboard or sterndrive. Favored where a shallow beach landing or a stern garage with minimal draft clearance rules out an exposed propeller.
- Chase / sport tenders – lighter, faster hulls built for watersports support or crew errands rather than formal guest transport.
A rigid-hull inflatable (RIB) tender in the 11-15 foot range with a center console suits most owners of larger yachts who need everyday crew and guest transport, while a fully enclosed cabin or “limousine” tender suits owners who want a standalone day boat that can also serve as a backup vessel. The right choice depends less on brand prestige and more on three practical factors: how the tender will be stored and launched from the mothership, how many people and how much gear it needs to carry, and what sea conditions it typically faces between anchorage and shore.
What “Larger Boats” Changes About Tender Selection
On a smaller boat, a tender is often an afterthought bought to fit whatever space is left on deck. On a larger yacht, the tender becomes a planned system: garage dimensions, davit weight limits, and swim-platform geometry are usually set during the yacht’s design or refit, and the tender has to match those numbers exactly. Builders and refit yards generally recommend confirming garage door height, hull width at the beam, and maximum hoist weight before shortlisting any tender, because a boat that is a few inches too wide or a few hundred pounds too heavy for the davit can make an otherwise ideal tender unusable.
Larger yachts also tend to use their tenders harder: more frequent shore runs, more guests per trip, and longer standby time at anchor in open roadsteads rather than sheltered marinas. That favors hull designs with higher freeboard, tubes (on RIB-style tenders) or deep-V hulls (on hardshell tenders) that handle chop without soaking passengers, and engines with enough reserve power to plane quickly with a full load.
Tender Types Common on Larger Yachts
Four broad tender formats cover most larger-yacht use cases, and each trades off differently on speed, capacity, weather protection, and storage footprint.
- Open RIB tenders – rigid hull with inflatable tubes, console steering, bench or jockey seating. The most common choice because they are light for their size, stable at rest, and forgiving to dock.
- Walkaround / limousine tenders – a hardshell or RIB hull with a cabin, windshield, and sometimes a small head. Chosen when the tender doubles as a weekend day boat.
- Jet-drive tenders – propulsion by waterjet instead of an outboard or sterndrive. Favored where a shallow beach landing or a stern garage with minimal draft clearance rules out an exposed propeller.
- Chase / sport tenders – lighter, faster hulls built for watersports support or crew errands rather than formal guest transport.
At a Glance: Tender Types and What They Suit
| Tender Type | Best For | Key Stated Specs (typical range) | Limits |
|---|---|---|---|
| Open RIB (center console) | Daily crew/guest shuttle, tow duty | 11-16 ft length, 4-10 passenger rating, outboard 40-150 hp class | Open to weather; limited dry storage |
| Walkaround / limousine | Owners wanting a standalone day boat | 13-20 ft length, cabin or wheelhouse, higher freeboard | Heavier; needs a larger garage or crane |
| Jet-drive tender | Shallow beaches, tight garages | 10-14 ft, jet pump drive, no exposed prop | Jet units generally cost more to service than outboards |
| Chase / sport tender | Watersports support, fast crew runs | 11-14 ft, lightweight hull, high-hp outboard | Lower passenger capacity, less weather protection |
Matching Tender Size to the Mothership
Yacht brokers and refit specialists commonly use garage length and beam, not yacht overall length alone, as the deciding measurement, because two yachts of the same length can have very different stern garage volumes. As a starting frame of reference, boats in the 60-80 foot range often carry a single 11-13 foot RIB tender stored on a hydraulic platform or in a small garage, while yachts above roughly 90-100 feet more often carry two tenders: a larger primary tender in the 13-18 foot range for guest transport, and a smaller chase or jet tender for crew and watersports. Always check the yacht’s specific davit or crane weight rating against the tender’s fully-fueled, fully-equipped weight, not just its dry hull weight, since fuel, batteries, and a folded bimini can add meaningfully to the figure the manufacturer lists for the bare hull.
Storage and Launch Systems
How the tender comes aboard matters as much as the tender itself. The main systems in use on larger yachts are:
- Stern garage with slide or crane – the tender stores fully inside the hull and launches through a door at the waterline. Requires exact hull width and height fit.
- Davits – swing or hydraulic arms that lift the tender from the water to a deck cradle. More flexible on tender shape but exposes the tender to weather on deck.
- Swim-platform launch – a hydraulic platform lowers to the waterline so the tender can float off or on. Common on midsize yachts with limited garage space.
Fit, not horsepower, is usually the first thing that eliminates candidate tenders on a larger yacht refit, so it’s worth measuring the garage or davit envelope before comparing engines or seating layouts.
Engines, Hulls, and Finish Level
Tender builders that focus on the larger-yacht market, such as Williams Jet Tenders, Zodiac Nautic, Brig, Highfield, Novurania, and AB Inflatables, generally offer the same hull in multiple trim levels: a working/crew trim with simple upholstery and a standard console, and a “yacht line” trim with matched gelcoat or hull color, finished teak, upgraded upholstery, and chrome or stainless hardware to match the mothership’s own fit-out. The maker’s own specification sheets are the right place to confirm current hull lengths, tube diameters, and engine compatibility, since these details are updated as outboard and jet-pump manufacturers release new engine families.
On propulsion, outboard engines remain the default for open RIB and chase tenders because they are easy to service in most ports worldwide, while jet-drive systems are chosen specifically to avoid an exposed propeller near swimmers, divers, or a shallow beach landing. Reviewers covering the tender market note that jet-drive tenders typically carry a price and maintenance premium over an equivalent outboard-powered hull, so the choice is usually about the landing conditions, not raw performance.
Pick This Tender Type If…
| If you… | Choose |
|---|---|
| Need daily guest shuttle service for groups of 6-10 | Open RIB, center console, 13-16 ft |
| Want the tender to double as a weekend day boat | Walkaround / limousine tender with a cabin |
| Land on beaches or operate near swimmers and divers regularly | Jet-drive tender |
| Need a lighter, fast boat mainly for crew and watersports | Chase / sport tender |
| Have a tight garage with a strict width or height limit | Smaller RIB or jet tender sized exactly to the garage opening, confirmed against the yacht’s own drawings |
Alternatives Worth Comparing
Beyond the mainstream tender builders above, three alternative approaches come up often enough to be worth a look:
- Foldable or RIB-tube collapsible tenders – used on yachts where deck space is at a premium and a hard tender doesn’t fit any storage option; trades some rigidity and top speed for storage flexibility.
- Electric or hybrid-outboard tenders – an emerging category from several outboard makers aimed at quiet harbor approaches and reduced fuel handling aboard; range and charging infrastructure should be checked against the yacht’s actual itinerary before committing.
- Secondhand or brokerage tenders from established builders – often a practical way to get yacht-trim finish at a lower tier of spend, provided the hull, tubes, and engine hours are inspected by a qualified marine surveyor before purchase.
Maintenance and Seasonal Care
Inflatable tubes on RIB tenders need periodic UV-protectant treatment and should be inspected for chafe anywhere they contact the garage or davit cradle. Outboards and jet pumps both need manufacturer-scheduled servicing, and salt water operation generally shortens service intervals compared with the maker’s freshwater baseline figures. Crews on larger yachts typically keep a tender maintenance log separate from the mothership’s own service records, since the tender often sees more engine hours per year than the yacht itself.
Frequently Asked Questions
How long should a tender be for a yacht over 80 feet?
Most yachts in that range carry a primary tender between 13 and 18 feet, sized to the garage or davit rather than to the yacht’s own length. Larger yachts often add a second, smaller chase tender for crew use and watersports support rather than scaling up a single tender past what the storage system can handle.
Is a jet-drive tender worth the extra cost over an outboard?
It depends on where the tender operates. If beach landings, swimmers, or divers are a regular part of the itinerary, the absence of an exposed propeller is a real safety and convenience advantage. If the tender mostly runs between a marina and a dock, an outboard is simpler to service in more ports and usually costs less to maintain.
What’s the difference between a RIB tender and a limousine tender?
An open RIB has tubes, a console, and no enclosed cabin, which keeps it light and easy to store. A limousine or walkaround tender adds a hardtop or cabin and more finished interior, at the cost of extra weight and a larger storage footprint, and is chosen when the owner wants the tender to work as a standalone day boat.
Can a tender be too heavy for a yacht’s davit?
Yes, and this is one of the most common fit problems in tender shopping. The davit or crane’s rated lift weight should be checked against the tender’s fully fueled and equipped weight, not the bare hull weight listed in marketing specs, since fuel, batteries, and canvas can add a meaningful margin.
Do larger yacht tenders need their own registration?
In most jurisdictions, a tender above a certain length or engine size needs its own registration separate from the mothership, and rules vary by country and by whether the tender is used only within sight of the yacht. Owners should confirm current requirements with their flag state or local maritime authority rather than assuming the mothership’s documentation covers the tender.
How often does a yacht tender’s engine need servicing compared with the main yacht engines?
Tenders typically accumulate more operating hours per year than the mothership because they run multiple shore trips daily, so many crews service the tender engine on a shorter calendar interval than the strict hour-based schedule alone would suggest. Following the engine maker’s salt-water service schedule, rather than the freshwater baseline, is the safer default.
Further reading
- Best Boat Dock Electrical Pedestal: Picks and What to Look For (2026)
- Best LED Boat Light Bar: Picks and What to Look For (2026)
- Best Juggling Balls: Picks and What to Look For (2026)
- Best Ultra Slim GFCI Outlet: Picks and What to Look For (2026)
- Best Power Converter DC to AC: Picks and What to Look For (2026)
- Best Impact Resistant Gloves: Picks and What to Look For (2026)