Updated Nov 18, 2026· 6 min read

Key takeaways

  • Ducted range hoods – vent cooking air outside through ductwork. Generally considered more effective for grease and odor removal since the air actually leaves the building, but require existing or newly installed ducting.
  • Ductless/recirculating range hoods – pull air through a charcoal or grease filter and return it to the kitchen. Easier to install without existing ductwork, but generally considered less effective at odor removal than a ducted system, and filters need regular replacement.
  • Under-cabinet, wall-mount, and island hoods – describe mounting location rather than venting type, and are available in both ducted and ductless versions; the mounting style should match the cooktop’s physical position in the kitchen.

A basic ducted range hood suits a kitchen that already has venting to the outside, a ductless/recirculating hood suits a kitchen without existing exterior ducting, and a bathroom exhaust fan is a different product entirely from a kitchen vent hood, built for moisture removal rather than grease and smoke, so matching the right category to the room matters before comparing specific models.

Exhaust Fan, Vent Hood, or Both: Clarify the Room First

“Exhaust fan vent hood” covers two related but distinct product categories depending on the room. In a kitchen, a vent hood (or range hood) sits above the cooktop and is rated to handle grease-laden air, smoke, and cooking odors, and is measured largely by its airflow rating and noise level. In a bathroom, an exhaust fan is rated for moisture and humidity removal to prevent mold and mildew, and is measured by airflow rating relative to room size and noise level, but is not designed or rated for grease and cooking smoke.

Buying the wrong category for the room is a common mistake: a bathroom-style exhaust fan installed over a cooktop will not be rated to handle grease buildup safely over time, and a kitchen hood is oversized and unnecessarily loud for a typical bathroom. Confirm which room the fan is for before comparing airflow numbers between product listings.

Kitchen Vent Hood Types

  • Ducted range hoods – vent cooking air outside through ductwork. Generally considered more effective for grease and odor removal since the air actually leaves the building, but require existing or newly installed ducting.
  • Ductless/recirculating range hoods – pull air through a charcoal or grease filter and return it to the kitchen. Easier to install without existing ductwork, but generally considered less effective at odor removal than a ducted system, and filters need regular replacement.
  • Under-cabinet, wall-mount, and island hoods – describe mounting location rather than venting type, and are available in both ducted and ductless versions; the mounting style should match the cooktop’s physical position in the kitchen.

Bathroom Exhaust Fan Types

  • Standard ceiling exhaust fans – the most common bathroom type, sized to the room’s square footage per the manufacturer’s airflow chart.
  • Fan/light combo units – combine ventilation with a light fixture in one housing, useful for bathrooms needing both in a limited ceiling footprint.
  • Humidity-sensing fans – automatically switch on when they detect elevated moisture, reducing the need to remember to switch the fan on manually.

At a Glance

Type Best for Key stated specs Limits
Ducted kitchen range hood Kitchens with existing or installable exterior ducting Airflow rating (CFM), ducted to outside Needs ductwork; installation more involved than ductless
Ductless kitchen range hood Kitchens without exterior ducting access Charcoal/grease filter, recirculates filtered air Less effective odor removal; filters need periodic replacement
Standard bathroom exhaust fan Moisture control in bathrooms Airflow rating (CFM) sized to room square footage Not rated for kitchen grease or smoke
Humidity-sensing bathroom fan Bathrooms prone to lingering moisture or mold Automatic humidity-triggered operation Costs more than a standard manual-switch fan

Pick This If…

If you… Pick…
Have existing exterior ductwork in the kitchen A ducted range hood for better odor and grease removal
Cannot install or access exterior ducting A ductless/recirculating range hood, committing to regular filter changes
Need moisture control in a bathroom A standard or humidity-sensing bathroom exhaust fan, not a kitchen hood
Often forget to turn the bathroom fan on A humidity-sensing fan
Are renovating and can choose either duct type Ducted, where feasible, for more effective kitchen venting

Sizing and Compatibility Notes

Kitchen range hoods are commonly sized by airflow rating (CFM) relative to the cooktop’s width and burner output; manufacturers often publish a recommended minimum CFM based on the cooktop’s total BTU rating or simply its width in inches, so check the hood’s listed recommendation against the specific cooktop rather than assuming a standard number. Mounting height above the cooktop also matters and is specified in the hood’s installation manual, since mounting too high or too low affects both capture performance and, for gas cooktops, clearance safety.

Bathroom fans are commonly sized using a published airflow chart based on the room’s square footage, with manufacturers and building-code references generally recommending higher CFM for larger rooms or rooms with a separate shower/tub enclosure. Duct diameter compatibility (commonly 4 or 6 inches) must match between the fan unit and the existing or planned ductwork, and noise level, measured in sones on many bathroom fan listings, is worth checking if a quiet fan is a priority since a lower sone rating indicates quieter operation.

Safety Notes

For kitchen hoods, follow the manufacturer’s clearance guidance above the cooktop, particularly for gas ranges, and have grease filters cleaned or replaced on the schedule stated in the manual to reduce fire risk from grease buildup. For bathroom fans, follow the manufacturer’s instructions for duct routing to the exterior rather than into an attic space, since venting moist air into an enclosed attic can contribute to mold and structural moisture problems over time. Any hardwired electrical installation for either type should be done by, or checked by, a licensed electrician, and should follow local building code requirements.

Alternatives Worth Considering

  • Portable air purifier with a carbon filter – does not replace proper kitchen venting but can supplement odor control in kitchens where installing a hood is not possible.
  • Through-wall or window-mounted exhaust fan – an alternative venting path for rooms where ceiling ducting is impractical.
  • Whole-house ventilation or exhaust system – for buyers renovating more broadly, a whole-house system can address both kitchen and bathroom venting needs as part of one project, though it is a larger undertaking than a single fan or hood.

Frequently Asked Questions

Can I use a bathroom exhaust fan over my stove?

No. Bathroom fans are rated for moisture removal, not for the grease-laden air and heat produced by cooking, and are not built with the grease filtration a kitchen hood needs. Use a product specifically listed as a range hood or kitchen exhaust hood over a cooktop.

Is a ducted or ductless range hood better?

Ducted hoods are generally considered more effective because the air is actually removed from the home rather than filtered and recirculated, according to how manufacturers typically describe the two systems. Ductless hoods are a practical option when exterior ducting is not available or feasible to install, but require regular filter replacement to maintain performance.

How do I know what size exhaust fan my bathroom needs?

Manufacturers and many building-code references publish airflow (CFM) recommendations based on bathroom square footage, with larger rooms or rooms with a separate shower and tub generally needing higher-rated fans. Check the specific fan’s packaging or manual for its recommended room size range rather than assuming a single CFM number fits all bathrooms.

Why does my bathroom fan run but the room still feels humid?

This can happen if the fan is undersized for the room, if the duct run is too long or has too many bends for the fan’s rated capacity, or if the duct vents into an attic rather than outside. Checking the fan’s CFM rating against the room’s square footage and confirming the duct terminates outside the home are the first troubleshooting steps.

How often should kitchen hood filters be cleaned or replaced?

This depends on the filter type and how often the kitchen is used for cooking that produces grease or smoke, and the manufacturer’s manual typically states a recommended cleaning or replacement interval. Charcoal filters in ductless hoods generally need replacement on a schedule, while metal grease filters in many ducted hoods can be cleaned and reused according to the manual’s instructions.

Does a range hood need to vent to the outside by code?

Requirements vary by local building code, and some jurisdictions require ducted venting to the exterior for new kitchen installations while others permit ductless recirculating hoods. Check local building code requirements or consult a licensed contractor before finalizing a venting approach, especially during a renovation or new installation.

C
Coworkingng Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.